Room Planning
Golf simulator room dimensions: what to measure
By Golf Driving Simulator Editors · Published 2026-10-30 · Updated 2026-10-30
Researched guide — not hands-on tested
Disclosure: Links marked "affiliate" may earn us a commission at no extra cost to you. It never affects what we recommend. Learn more.
Measuring the room accurately is the most important planning step. Dimensions alone never make a room safe to swing in, but they determine which equipment is realistic.
Ceiling height
Your full driver swing is the limiting factor; taller golfers and upright swings need more height. Many installers treat roughly 9–10 feet as a practical starting point for full swings, but the only reliable check is a slow, careful practice swing with your longest club, in the exact hitting spot, with someone watching clearance.
Ceiling-mounted launch monitors have their own published mounting-height ranges — follow those.
Width
Allow for the swing arc on both sides plus margin for mishits. Mixed-handedness households should centre the hitting spot or plan two positions. Enclosure walls add protection but consume width.
Depth
- Behind the golfer — backswing room, and space for radar units placed behind.
- Ball to screen — screens need distance to reduce rebounds; screen makers publish minimums.
- Screen to back wall — a gap so the screen can flex.
Before you buy
- Measure at floor and ceiling level — beams, soffits and lights reduce usable space.
- Note doors, windows, vents and garage-door tracks.
- Make sure the mat will sit level and not slide.
- Plan power and cable runs.
- If anything is marginal, get a professional site assessment.
Lay it out in the Room Planner.
General planning indicators only. Always follow manufacturer installation requirements.
Ready to plan your setup?
Sources
- Manufacturer installation guides